Home > Products > 48KG RC SERVO

48KG RC SERVO Manufacturers

Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for 48KG RC SERVO,48KG SERVO,45KG MAGNETIC SERVO,45KG ROBOT SERVO,48kg rc car servo, We're on the lookout ahead to receiving your enquiries soon.
48KG RC SERVO, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.

Related Products

Hot Products

  • FH-D9257MG Tail Servo

    FH-D9257MG Tail Servo

    FH-D9257MG Tai Servo
    ●Dimension: 36.0mm x 15.2mm x 28.8mm
    ● Weight: 25g
    ●Stall torque: 4 kg-cm(4.8V),4.5 kg-cm(6V)
    ● Operating speed: 0.08sec/60°(4.8V), 0.07sec/60°(6V)
    ● Operating voltage: 4.8V-6V
    ● No loading current:0.18A(4.8V),0.21A(6V)
    ● Loading current:1A(4.8V),1.5A(6V)
    ●Equipped with two ball bearings.
    ●Comes with a selection of servo arms/discs, mounting screws.
  • BGM5208-75T Gimbal Motor

    BGM5208-75T Gimbal Motor

    BGM5208-75T Gimbal Motor Specification
    Weight：189g
    Motor Size：63*24mm
    Shaft Size：Hollow shaft in 5.0mm
  • FH-2162 Micro Servo

    FH-2162 Micro Servo

    FH-2162 Micro Servo
    ●Motor: coreless motor
    ●Working frequence: 1520μs / 330hz
    ●Operating Voltage: DC6.0~7.4 V
    ●Operating Temperature Range: -10 to + 60°c
    ●Operating Speed (6.0V): 0.07sec/60 °
    ●Operating Speed (7.4V): 0.05sec/60°
    ●Stall Torque (6.0V): 4.8kg.cm (67.09oz/in)
    ●Stall Torque (7.4V): 6.2kg.cm (86.81oz/in)
    ●Potentiometer Drive: Direct Drive
    ●Dimensions: 23X12X27.6 mm
    ●Weight: 20.3 g (0.72oz)
  • Mars 2808 BLDC Motor

    Mars 2808 BLDC Motor

    With years of experience in production M2808 Brushless Motor, Flash Hobby can supply a wide range of M2808 Brushless Motor.
    ●KV:KV1100 ●Weight: 60.4g (incl cable)
    ●Motor Size:ф34.3x23 mm
    ●resistance:0.084Ω
    ●Configuration: 12N/14P
    ●Shaft Dia:5mm
    ●Rated Voltage（Lipo): 3-6S
    ●current no load:1.33/16V
    ●Peak Current（60S）:42.52A
    ●Max Power: 1064W
    ●Max Pull:2378G
  • A3220 Brushless Motor

    A3220 Brushless Motor

    A3220 Brushless Motor
    ●Weight: 273g (including the cables)
    ●Motor Size: 38.3 x 37.8mm
    ●Shaft Diameter: 5.0mm
    ●Motor Mount: 19*19mm(M3*4)
    ●Configuration: 12N14P
    ●Motor Cable: 16#AWG  250mm
    ●KV Value: 700KV or customed KV
  • H500 Helicopter Motor

    H500 Helicopter Motor

    H500 Helicopter Motor
    ●Weight: 253.3g (including the cables)
    ●Motor Size: 43.5x44.5mm
    ●Stator Diameter: 35mm
    ●Stator Height: 24mm
    ●Shaft Diameter: 5.0mm
    ●Motor Mount: 25*25mm(M3*4)
    ●Configuration:9N6P
  • Related Blog
  • Reviews

  • The landing of drones in the agricultural field

    For people, UAVs are mainly based on three aspects of agricultural applications and attract attention...

  • WHAT IS AN OUTRUNNER MOTOR?

    Typically an outrunner motor is a Permanent Magnet Synchronous Motor (PMSM) torque motor. Therefore, the motor consists of a stator with coils and a rotor with permanent magnets. With conventional motors, the magnets are attached to a shaft that rotates on the inside of the stator coils. This is called an inrunner motor. With an outrunner motor the magnets are attached to a ring or sleeve on the outside of the stator coils. As a result, the motor has a rotating ring or sleeve, instead of a rotating shaft.

  • What are the advantages of Micro Servo?

    ​One of the primary advantages of micro servo technology is its miniaturized size.

  • What does the gimbal motor overload mean?

    Overload means that what the motor is dragging exceeds the weight that the motor can drive. Then there is an overload!

  • What are the functions of a Servo Programmer?

    ​As technology advances, so does the need for more precise and efficient control systems. This is where servo motors come in.

  • Introduction of micro servo

    The micro servo includes a housing, a deceleration component, a driving part and a positioning control part

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept