A2807 x class motor Manufacturers

Having a positive and progressive attitude to customer's fascination, our organization constantly improves our solution high-quality to fulfill the requirements of shoppers and further focuses on safety, reliability, environmental prerequisites, and innovation of A2807 x class motor,A2807 brushless motor,A2807 dc motor,A2807 brushless dc motor,A2807 motor, Looking to the long run, a lengthy way to go, regularly striving to become the all employees with full enthusiasm, one hundred times the confidence and put our company built a beautiful environment, advanced merchandise, good quality first-class modern company and work hard!
A2807 x class motor, Make sure you feel cost-free to send us your specifications and we'll respond to you asap. We have got a professional engineering team to serve for the every single thorough needs. Free samples may be sent to suit your needs personally to know far more facts. So that you can meet your desires, be sure to genuinely feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.

Hot Products

  • MT8108 Brushless DC Motor

    MT8108 Brushless DC Motor

    MT8108 Brushless DC Motor
    ●Weight: 240g (including the cables)
    ●Motor Size:86.8*26.6mm
    ●Stator Diameter: 81mm
    ●Stator Height: 8mm
    ●Shaft Diameter: 8mm
    ●Mounting Screw Pattern: 30x30mm(M3*4)
    ●Configuration: 24N22P
    ●Motor Cable: 20#AWG 90mm
    ●KV Value: 100KV, 135KV or customed KV
    ●Recommend: 20~28 inch prop application
    ●NSK Bearing
  • F722 Stack Controller

    F722 Stack Controller

    ●Item: F722 stack controller ●MCU:STM32F722RET6 ●IMU(Gyro): ICM42688 ●USB Port Type: Type-C ●Weight: 7.5g ●Mounting Size: 30.5*30.5mm ●Dimension: 37(L) x 37(W) x 6.6(H)mm  FLASH HOBBY BLS 60A 30.5x30.5 4-in-1 ESC ●Firmware: BLS 16.7 ●Weight: 12g ●Dimension:42.3(L) * 37(W) * 6.2mm(H) ●Mounting Size:30.5 x 30.5mm( 4mm hole diameter) ●ESC Protocol: DSHOT300/600 
  • A2812 Brushless Motor

    A2812 Brushless Motor

    A2812 Brushless Motor
    ●Weight: 76g (including the cables)
    ●Motor Size: ф33.1x27 mm
    ●Shaft Diameter: 5.0mm
    ●Motor Mount: 19*19mm(M3*4)
    ●Configuration: 12N14P
    ●Motor Cable: 18#AWG  220mm
    ●KV Value: 900KV or customed KV
    ●Recommend: 7~10 inch prop application
  • Mars 2816 BLDC Motor

    Mars 2816 BLDC Motor

    With years of experience in production M2816 Brushless Motor, Flash Hobby can supply a wide range of M2816 Brushless Motor.
    ●KV:KV750 ●Weight: 96.6g (including the cables)
    ●Motor Size:ф34.3 x 31mm
    ●resistance: 0.084Ω
    ●Configuration: 12N/14P
    ●Shaft Dia:5mm
    ●Rated Voltage(Lipo): 3-6S
    ●current no load: 1.28A/16V
    ●Peak Current(60S): 38.09A
    ●Max Power: 930W
    ●Max Pull:2725G
     ●KV:KV830 ●Weight: 96.6g (including the cables)
    ●Motor Size:ф34.3 x 31mm
    ●resistance: 0.084Ω
    ●Configuration: 12N/14P
    ●Shaft Dia:5mm
    ●Rated Voltage(Lipo): 3-6S
    ●current no load: 1.66A/16V
    ●Peak Current(60S): 54.92A
    ●Max Power: 1326W
    ●Max Pull:3265G
  • FH-9025MG Micro Servo

    FH-9025MG Micro Servo

    FH-9025MG Micro Servo
    Control System: Pulse Width Modulation Control 1520 μsec
    Operation Voltage Range: 4.8V ~6.0V
    Operation Temperature Range: '-10C°~ +50C°
    Circle: >120000 times
  • Helical Servo Programmer Smart-03

    Helical Servo Programmer Smart-03

    Helical Servo Programmer Smart-03

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy